Incorporating A Vibrating Dog Collar in Your Dog Training

In preparation for training your dog with your new underground dog fence, you’ll need to work with a vibrating dog-training collar. This collar teaches your pup to notice when she’s coming close to the boundaries of the fence and to stop BEFOREshe crosses that line.

 

Introducing The Collar To The Dog

The first thing you’ll want to do is get your dog used to wearing her new vibrating dog collar. Because of the technology involved, these collars tend to be a tiny bit heavier and bulkier than regular dog collars, and you want your dog to feel comfortable wearing hers.

Adjust the collar so that the prongs are just resting on her skin and not burrowing into her neck. You want to make it tight enough so that she feels the vibrations immediately, but yet not so loose that she can pull it over her head. Usually, being able to slip 1 or 2 fingers between the collar and your dog’s neck works best.

Place the vibrating dog collar on her neck and give her a treat. Leave the collar on for 10 to 15 minutes – just long enough for her to feel comfortable – then remove it. Do this several times during the first day of training, always remembering to treat her every time you put on the collar.

During the second training day, extend your training intervals to 15 to 30 minutes, again treating as you place the collar on your pup.

By the third day, you should be able to start leaving the collar on for longer periods of time. In any case, we recommend that you NEVER leave the collar on for longer than 12 hours.

Resist the urge during the collar training to try the vibrating sensation with your dog. You want her to be perfectly comfortable wearing the collar, and starting the vibration training too early can be a distraction.

Introducing The Vibration

Once your pup is fully comfortable wearing her vibrating dog-training collar, you can begin introducing the sensation of the vibrations to her. You’ll need to have treats and her clicker available to get her attention – she needs to learn that the buzzing on her neck is coming from you and that you won’t harm her.

Place her on her leash and move her close to your body. Set your remote control on its lowest setting, and, press it. Immediately use the clicker and give your dog a treat without waiting for her to look at you. Perform this step 10 times in a row – press and treat, press and treat – and then quit.

Keep these initial training sessions very short, 5 to 10 minutes only. Leave the vibrating dog collar on your pooch and repeat these sessions 2 to 3 times during the day. You’re wanting her to get used the vibrations and know they are coming from you.

Continue to train in this manner for several days to a week, keeping her close to you. If she starts to look at you when you press the remote, give her extra treats and lavish praise. She’s telling you she’s ready to move on to the “paging” part of her training.

Training to Respond When Paged

When she begins to look at you during a vibration, you know your dog is starting to associate the feeling on her neck with you. That means she is not afraid of the feeling, but is looking to you for guidance as to what to do next. In this training step, you are going to require her to look at you.

As before, keep her close to you during these sessions and make sure this time will be free of distractions.

Page her with a quick press of the remote control, and when she looks at you, IMMEDIATELYtreat her. If she doesnt look at you, move your hand with the treats down in front of her nose so that she sees and smells it, and then move the treat up to your face so that she looks at you. Give her the treat when you make eye contact. Your goal is to have her consistently look at you every time she’s paged. A dog trained in this fashion, will come find you if you’re out of sight range.

As she begins to make consistent eye contact, you can start to move away from her. Start by letting her off the leash, but keep her in the same room with you. Allow her to move about the room and page her when she’s distracted. Give her a treat every time you page and she looks up for you.

Once she is performing this feat every single time, you can move outdoors for training. Please note that if she’s not responding as you want, you may have pushed her too fast in her training and you need to back up a step.

Moving outdoors typically means starting this training over from the beginning, so use your leash as a control, keep your dog close to you, and begin introducing the vibrating collar to her as you did in the house…only this time, you’ll have all those outside noises and smells to deal with. Take your time with this part of her training.

Remember, kindness, patience, and consistency will teach better than harsh words or impatient hands.

How A Vibrating Dog Collar Works

The buzzing of your dog’s training collar works to get her attention focused on you. It tells her that you want her to look at you and that you are going to give her a command to do something. If you train her properly and consistently, you can use her vibrating collar to tell her to come when called, to stay in sight of you in the yard, to not eat that piece of trash on the ground, and to not follow the neighbor’s dog as he walks down the street in front of your house. It’s a constant reminder to your dog of those boundaries that you work hard to instill in her.

This type of training works especially well with deaf dogs or older canines that may be a little hard of hearing. A deaf dog can’t hear you to look around when you call and won’t hear a car horn or the squeal of brakes. Using a vibrating dog collar on a deaf dog is the equivalent of teaching her how to listen for your voice and pay attention to what you want. Additionally, you use the same training methods for a deaf dog as you would a dog with correct hearing.

Many modern collars come with soft, rubber prongs that vibrate against your dog’s skin instead of the old-fashioned metal ones. You can adjust them for strength and range. For example, if you have a more dominant dog, you may need to make the warning vibration a little stronger than you would for a more submissive pooch. You should find a collar that best fits your dog – one that is neither too small nor too big – is waterproof, shows options for vibration and tone, has a range that fits your yard, and has a long battery life.

You can use your vibrating dog-training collar alone, or with the static correction collar available through most underground dog containment systems. Whichever you choose, remember that training of any dog works best when patience, kindness and consistency factor into the training module.

Guest Article by Sarah Stoltzfus
This article is sponsored by Havahart Wireless, please feel free to visit their website, http://www.havahartwireless.com/

Related Posts by Categories